⚡ Descuentos en cursos en video - Lleva tu aprendizaje técnico al siguiente nivel y aprovecha precios especiales antes de que termine la oferta. 🔥 Aprovechar oferta ahora 🔥
TVs

Lg 49lf6450 does not turn on

raul sajama
hace 6 años
hace 6 años
Hello friends of the forum ... I have an LG smartv which does not turn on, only the standby LED flashes (approximately 7 times) and goes out ... measured at source board voltages which are: P-DIM1 = 0.57 v DRV-ON = 0.10v P-DIM2 = 0.59 v PWR-ON = 3.43 v 13.2 V = 13.3 v https://cdn2.yoreparo.com/uploads/imagen_post/0003/94/782f5225e915716e5d1c73394fdeecd78fa1169b.jpeg 20180510_195642 [1] .jpg [1.52MB] is it that the main board is damaged ?? .. I leave the image to be guided ... thank you in advance for your collaboration another little thing the processor heats up a lot ... ess normall ?? .. greetings https://cdn2.yoreparo.com/uploads/imagen_post/0003/94/782f5225e915716e5d1c73394fdeecd78fa1169b.jpeg" alt="" />
leasmacruz
leasmacruz
1.594
hace 6 años

Disconnect the LEDs and test if it lifts

Responder
raul sajama
hace 6 años

still not raising friend and eh is disconnected

Responder
eov47
eov47
665
hace 6 años
hace 6 años
Hello, from what you see in the second photo, the tension is not the same in the 2 branches of LEDs (backlight) probably have broken LEDs and cut the protection. Regards
raul sajama
hace 6 años

No, it is not the same ... what tensions should I have?

Responder
eov47
eov47
665
hace 6 años

Generally some LEDs are shorted, as they are in series, the others receive excess voltage. To verify and change the LEDs, the panel (screen) must be opened very carefully. You have to take into account the voltage of the LEDs (6v. Or 3v.), Once changed you have to measure that the new and the original ones have the same voltage. A "Blester - led tv panel tester - Creatronica" is available online, with a single button you test a led or a series (the voltage is automatically adjusted). Regards

Responder
raul sajama
hace 6 años
hace 6 años
Hi friends, it was definitely the main board ... I already changed it and the TV started ... thanks for your help
Reparaciones similares solucionadas

¿Conoces una solución?

¡Aprende a reparar con estos cursos YoReparo!

4.93
(14)

Curso Reparación de Equipos de Audio de Alta Fidelidad

Maximiliano Resch
$ 60 USD
$ 20 USD
4.25
(8)

Reparación de Placa Main TV LED con el Ing. Picerno

Ing. Alberto H. Picerno
$ 40 USD
$ 20 USD
4.6
(10)

Curso Localización de Fallas en Refrigeración en Heladeras/Neveras On/Off

Yamil Alarcón
$ 29 USD
$ 12 USD
¿Tienes una mejor respuesta a este tema? ¿Quieres hacerle una pregunta a nuestra comunidad y sus expertos?
Regístrate gratis